SCIFIT SXT7000 Manuel d'utilisateur télécharger pdf (Page 62)

DD. Belt Replacement

1. Remove the left TeleRail, using the TeleRail Removal procedure.

2. Remove the left crank arm, using the Crank Arm Removal procedure.

3. Mark the position of the flangettes (P1095) on the left side of the

monocoque. Mark flangettes in at least two (2) places.

4. Unhook the poly-v belt from the brake drive pulley (A1545).

5. Using a ½” wrench or socket, remove the bolts holding the frame spacer

(A1131) to the monocoque. Remove frame spacer from unit.

6. Loosen the set screws on the left bearing collar (P1096), using a 1/8”

Allen wrench. There are two (2) set screws on the bearing collar.

1 2 ... 57 58 59 60 61 62 63 64 65

Pas de commentaire

SCIFIT SXT7000 Manuel d'utilisateur Page 62