SCIFIT SXT7000 Manuel d'utilisateur télécharger pdf (Page 58)

AA. TeleRail Removal

1. Remove the acorn nut from the rear TeleRail bolt, using a 9/16” wrench.

2. Using a 3/16” Allen wrench and ½” wrench or socket, remove the bolt,

washer, and nut from the rear of the silver TeleRail bar (A1524).

3. Lift the rear of the TeleRail bar out of the vertically mounted brackets

welded to the black frame. Do not lose the bushing (A1533) that goes

through the rear of the TeleRail bar.

4. Support the black TeleRail and pull the silver bar out the rear. Do not let

the black TeleRail fall when pulling out the silver bar.

5. This step is for the SXT7000 only. If you don’t have an SXT7000, go on to

step 6. Remove the acorn nut on the lower pivot bolt located just below

the foot cushion, using a 9/16” wrench. Using a 3/16” Allen wrench and

½” wrench or socket, remove the bolt, washer, and nut from the lower

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64 65

Pas de commentaire

SCIFIT SXT7000 Manuel d'utilisateur Page 58